Share a cleaning and maintenance guide for nubuck leather labor protection shoes, affordable and easy to use, it is recommended to collect!

Nubuck leather is the most common leather material in labor protection shoes, accounting for more than half of the world's total leather production, and more than half of it is used to make footwear. The previous article introduced the advantages and disadvantages of nubuck leather with you, today SINOTECH will talk to you about the cleaning and maintenance guide of nubuck leather labor protection shoes, the correct use and maintenance can maintain the service life of labor protection shoes, you can choose according to your own needs.

（Click on the image to go directly to the product link）

Guide to cleaning and maintenance of nubuck leather protective shoes:

1. Clean the dust

Nubuck shoes can not use a stiff brush, which will damage the surface of the leather, you can use a rag or use a special cloth designed for cleaning nubuck leather shoes to wipe them. Labor protection shoes with laces should be removed when wiping, and brushed in the same direction with a circle action, not brushing back and forth, so that each surface of the shoes is rubbed and the dirt on the leather surface is removed. If you usually wear dirty, you can also use a soft toothbrush to wipe off the dirt on the epidermis, which is simple and convenient, and at the same time maintain your shoes.

2. Do not wash

It cannot be washed directly in water, and frequent washing with water will cause the sole to fall off, and the nubuck leather will slowly deteriorate, so do not wash it directly.

3. Clean severe stains

Severe stains can be removed with a nubuck cleaner, spray the cleaner on a rag and wipe the entire surface. After wiping, brush the fluff brush with a brush to bring out excess stains.

4. Blot dry with a cloth

When the leather surface is basically washed, you can use a clean soft cloth to blot it to break down the stains, and place the shoes in a cool and ventilated place to dry. This avoids damaging the cowhide and thus protects the nubuck leather shoes.

5. Maintenance and care

Wipe your nubuck shoes regularly and apply a maintenance agent. It is necessary to wipe the nubuck leather with a rag regularly and maintain it, and the nubuck leather labor protection shoes must be thoroughly dried after spraying the maintenance agent before they can be used again. Remember to caress the leather surface before applying the conditioner to keep the fluff upright.

The above is a brief introduction to the cleaning and maintenance guide of nubuck leather labor protection shoes, today I will explain so much for you, I hope it can help you, if you have anything to do with the purchase of labor protection shoes, welcome to consult and leave a message, discuss together.